FREE SHIPPING ON ORDERS OVER $500

       

Electrical Tools and Instruments

At American Copper & Brass, we offer a wide range of electrical tools and instruments to help electricians confidently tackle any job. Whether you're a seasoned professional or just starting out, our selection of high-quality tools will meet your needs.

We carry a variety of products from brands you trust, like Klein and Milwaukee electrical tools. Our line contains pliers, screwdrivers, and wire strippers, as well as other essential tools for electricians, such as multimeters, circuit testers, and voltage detectors.

We understand that having the right tools for electricians is crucial for getting the job done efficiently and effectively. Check out our full selection of electrical tools and instruments, and feel free to contact us with any questions or for expert advice on choosing the right electrical products for your needs.

   
       

ELECTRICAL TOOLS AND INSTRUMENTS

Per Page

139 Results

 

  • 32483 Klein Tools Bit #2 Phillips 1/4" Slotted

    32483 Klein Tools Bit #2 Phillips 1/4" Slotted

    Code: 32483
    A replacement bit contains a #2 Phillips and a 1/4-Inch Slotted tip. Fits the 11-in-1 (32500) and 10-in-1 (32477) Screwdriver/Nut Drivers. Precision-machined tips for exact fit into fastener.
    US$5.00
    In Stock
    Stock qty: 11
  • SNATCH STRAP WIRE PULLER

    SNATCH STRAP WIRE PULLER

    Code: 69455
    Vendor: RACK-A-TIERS| Vendor # 69455
    US$POA
    In Stock
    Stock qty: 5
  • 1/2 COMMUNICATION DEVICE

    1/2 COMMUNICATION DEVICE

    Code: LJ50R
    Vendor: RACK-A-TIERS| Vendor # LJ50R
    US$1.00
    Out Of Stock
    Stock qty: 0
  • UNIVERSAL NON-CONTACT TESTER

    UNIVERSAL NON-CONTACT TESTER

    Code: TR-12A
    Vendor: GREENLEE TEXTRON INC| Vendor # TR-12A
    US$35.09
    In Stock
    Stock qty: 6
  • GRAY PHASE TAPE

    GRAY PHASE TAPE

    Code: 35GRAY
    Vendor: MCMASTER-CARR SUPPLY CO| Vendor # 35GRAY
    US$7.28
    In Stock
    Stock qty: 10
  • RED PHASE TAPE

    RED PHASE TAPE

    Code: 35RED
    Vendor: MCMASTER-CARR SUPPLY CO| Vendor # 35RED
    US$8.19
    In Stock
    Stock qty: 28
  • VIOLET PHASE TAPE

    VIOLET PHASE TAPE

    Code: 35VIOLET
    Vendor: MCMASTER-CARR SUPPLY CO| Vendor # 35VIOLET
    US$8.38
    Out Of Stock
    Stock qty: 0
  • BLUE PHASE TAPE

    BLUE PHASE TAPE

    Code: 35BLUE
    Vendor: ORGILL INC| Vendor # 35BLUE
    US$7.35
    In Stock
    Stock qty: 9
  • WHITE PHASE TAPE

    WHITE PHASE TAPE

    Code: 35WHITE
    Vendor: ORGILL INC| Vendor # 35WHITE
    US$7.50
    In Stock
    Stock qty: 4
  • YELLOW PHASE TAPE

    YELLOW PHASE TAPE

    Code: 35YELLOW
    Vendor: ORGILL INC| Vendor # 35YELLOW
    US$7.27
    In Stock
    Stock qty: 10
  • MINI BUTT POUCH POCKET

    MINI BUTT POUCH POCKET

    Code: 43015
    Vendor: RACK-A-TIERS| Vendor # 43015
    US$21.38
    Out Of Stock
    Stock qty: 0
  • HOLDSABIT KIT INCL 6 BIT

    HOLDSABIT KIT INCL 6 BIT

    Code: 700-KIT
    Vendor: RACK-A-TIERS| Vendor # 146-8073
    US$24.17
    In Stock
    Stock qty: 1
  • 4BIT FOR DEVICE SCREW""""

    4BIT FOR DEVICE SCREW""""

    Code: 72134PP1
    Vendor: RACK-A-TIERS| Vendor # 72134PP1
    US$4.58
    Out Of Stock
    Stock qty: 0
  • SPEEDWAY COVER CLIP

    SPEEDWAY COVER CLIP

    Code: CC-6
    Vendor: RACK-A-TIERS| Vendor # CC-6
    US$2.27
    In Stock
    Stock qty: 22
  • SPEEDWAY END CAP

    SPEEDWAY END CAP

    Code: EC-6
    Vendor: RACK-A-TIERS| Vendor # EC-6
    US$2.59
    In Stock
    Stock qty: 7
  • 6-12 VOLT ELECTRIC TESTER

    6-12 VOLT ELECTRIC TESTER

    Code: 612VT
    Vendor: ORGILL INC| Vendor # 613
    US$4.37
    In Stock
    Stock qty: 1
  • 6OUTLET GROUNDED ADPT.

    6OUTLET GROUNDED ADPT.

    Code: C1146V
    Vendor: ORGILL INC| Vendor # 496-9957
    US$7.15
    In Stock
    Stock qty: 14
  • 6OUTLET GROUNDED ADPT.

    6OUTLET GROUNDED ADPT.

    Code: C1146W
    Vendor: ORGILL INC| Vendor # 454-1397
    US$7.36
    In Stock
    Stock qty: 5
  • 1 PACK 9-VOLT BATTERY

    1 PACK 9-VOLT BATTERY

    Code: DRY0005
    Vendor: ORGILL INC| Vendor # 833-7669
    US$3.15
    Out Of Stock
    Stock qty: 0
  • 4 PACK AAA BATTERY

    4 PACK AAA BATTERY

    Code: DRY0035
    Vendor: ORGILL INC| Vendor # 676-5309
    US$3.57
    Out Of Stock
    Stock qty: 0
  • ENERGIZER A23 12V ALKALINE BATTERY

    ENERGIZER A23 12V ALKALINE BATTERY

    Code: DRY1855
    Vendor: ORGILL INC| Vendor # 576-4733
    US$4.41
    Out Of Stock
    Stock qty: 0
  • 100 FOOT FISH TAPE

    100 FOOT FISH TAPE

    Code: FT100
    Vendor: ORGILL INC| Vendor # 615-4694
    US$73.42
    Out Of Stock
    Stock qty: 0
  • TWIST APART SPACERS FOR OUTLETS AND TRIM PLATES

    TWIST APART SPACERS FOR OUTLETS AND TRIM PLATES

    Code: GSP-04
    Vendor: ORGILL INC| Vendor # 631-2409
    US$6.66
    In Stock
    Stock qty: 10
  • INSULATED STAPLE ROMEX NM CABLE STAPLES – WOOD 1/2” – BAG OF 50

    INSULATED STAPLE ROMEX NM CABLE STAPLES – WOOD 1/2” – BAG OF 50

    Code: ISR12
    Vendor: ORGILL INC| Vendor # 627-0516
    US$2.58
    In Stock
    Stock qty: 11
  • INSULATED STAPLE-WHITE LOW VOLT STAPLES (WHITE) – wood 1/8” – PKG OF 40 – SECURES LOW-VOLTAGE/BELL WIRE/SPEAKER/TELEPHONE & THERMOSTAT

    INSULATED STAPLE-WHITE LOW VOLT STAPLES (WHITE) – wood 1/8” – PKG OF 40 – SECURES LOW-VOLTAGE/BELL WIRE/SPEAKER/TELEPHONE & THERMOSTAT

    Code: ISW
    Vendor: ORGILL INC| Vendor # 631-0601
    US$1.74
    In Stock
    Stock qty: 9
  • WIREGARD CONNECTOR BLUE

    WIREGARD CONNECTOR BLUE

    Code: WGCBO
    Vendor: ORGILL INC| Vendor # 611-0126
    US$0.05
    In Stock
    Stock qty: 3
  • 6 PACK -9 VOLT BATTERIES

    6 PACK -9 VOLT BATTERIES

    Code: AL-9V
    Vendor: SPECTRUM BRANDS-RAYOVAC| Vendor # AL9V-6J
    US$16.72
    In Stock
    Stock qty: 51
  • 8 PACK -AA SIZE BATTERIES

    8 PACK -AA SIZE BATTERIES

    Code: AL-AA
    Vendor: SPECTRUM BRANDS-RAYOVAC| Vendor # ALAA-8J
    US$7.81
    In Stock
    Stock qty: 59
  • 8 PACK -AAA SIZE BATTERIES

    8 PACK -AAA SIZE BATTERIES

    Code: AL-AAA
    Vendor: SPECTRUM BRANDS-RAYOVAC| Vendor # ALAAA-8J
    US$8.39
    In Stock
    Stock qty: 56
  • 6 PACK -SIZE D BATTERIES

    6 PACK -SIZE D BATTERIES

    Code: AL-D
    Vendor: SPECTRUM BRANDS-RAYOVAC| Vendor # ALD-6J
    US$8.39
    In Stock
    Stock qty: 35
  • 1 GALLON WIREAIDE PULL LUBE

    1 GALLON WIREAIDE PULL LUBE

    Code: 79-002
    Vendor: ORGILL INC| Vendor # 79-002
    US$20.36
    Out Of Stock
    Stock qty: 0
  • 24 FOOT FIBERGLASS EXTENSION LADDER, 300 LB CAPACITY

    24 FOOT FIBERGLASS EXTENSION LADDER, 300 LB CAPACITY

    Code: FE24
    Vendor: ORGILL INC| Vendor # 161-6465
    US$398.32
    In Stock
    Stock qty: 1
  • 4 FOOT FIBERGLASS STEP LADDER

    4 FOOT FIBERGLASS STEP LADDER

    Code: FS4
    Vendor: ORGILL INC| Vendor # 221-8329
    US$140.77
    In Stock
    Stock qty: 5
  • 1 OZ OX-GUARD ANTI-OXIDENT COMPOUND

    1 OZ OX-GUARD ANTI-OXIDENT COMPOUND

    Code: GBOX100
    Vendor: ORGILL INC| Vendor # 611-7287
    US$6.49
    In Stock
    Stock qty: 20
  • 4 OZ TUBE ANTI-OXIDENT COMPOUND

    4 OZ TUBE ANTI-OXIDENT COMPOUND

    Code: OX400
    Vendor: ORGILL INC| Vendor # 643-7206
    US$9.95
    In Stock
    Stock qty: 10
  • 3M 33+ BLACK VINYL ELECTRICAL TAPE

    3M 33+ BLACK VINYL ELECTRICAL TAPE

    Code: 33T
    Vendor: ORGILL INC| Vendor # 415-6600
    US$8.89
    In Stock
    Stock qty: 126
  • 7187 EMC Fasteners & Tools Universal Steel & Wood Socket (Red)

    7187 EMC Fasteners & Tools Universal Steel & Wood Socket (Red)

    Code: 7187
    Universal Steel & Wood Socket (Red).
    US$10.46
    In Stock
    Stock qty: 6
  • 1 CONDUIT PISTON (MOUSE)

    1 CONDUIT PISTON (MOUSE)

    Code: 610-5
    Vendor: GREENLEE TEXTRON INC| Vendor # 610-5
    US$45.90
    Out Of Stock
    Stock qty: 0
  • CL120 Klein Tools Digital Clamp Meter, AC Auto-Ranging 400 Amp

    CL120 Klein Tools Digital Clamp Meter, AC Auto-Ranging 400 Amp

    Code: CL100
    Klein Tools CL120 Clamp Meter is an automatically ranging digital clamp-meter that measures AC current and NCVT via the clamp, and AC/DC voltage, resistance and continuity via test-leads. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with time-saving features.
    US$54.97
    In Stock
    Stock qty: 6
  • CL700 Klein Tools Digital Clamp Meter, AC Auto-Ranging TRMS, Low Impedance (LoZ) Mode

    CL700 Klein Tools Digital Clamp Meter, AC Auto-Ranging TRMS, Low Impedance (LoZ) Mode

    Code: CL1000
    Klein Tools CL700 Electrical Tester is an automatically ranging true root mean squared (TRMS) digital clamp meter that measures AC current via the clamp, and measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters loaded with innovative, time-saving features.
    US$113.23
    In Stock
    Stock qty: 4
  • ET300 Klein Tools Digital Circuit Breaker Finder ET300

    ET300 Klein Tools Digital Circuit Breaker Finder ET300

    Code: ET300
    The Klein Tools ET300 Digital Circuit Breaker Finder quickly, accurately, and automatically finds the corresponding circuit breaker of any standard 120V electrical outlet. The flashing arrow indicator lets you quickly identify when you've got a hit. The strong transmitter reaches up to 1000 feet. The auto power-off feature saves battery life and gives you one less thing to worry about.
    US$56.90
    In Stock
    Stock qty: 4
  • HD 1/4X1 EMC Fasteners & Tools Steel Hammer Drive Nail

    HD 1/4X1 EMC Fasteners & Tools Steel Hammer Drive Nail

    Code: HD141
    Steel Hammer Drive Nail.
    US$11.28
    Out Of Stock
    Stock qty: 0
  • 6" SHALLOW IC HOUSING RECESS LIGHTING

    6" SHALLOW IC HOUSING RECESS LIGHTING

    Code: LH27IC
    Vendor: ELITE LIGHTING CORP| Vendor # B26IC-AT-W
    US$15.03
    In Stock
    Stock qty: 33
  • MM600 Klein Tools Digital Multimeter, Auto-Ranging, 1000V

    MM600 Klein Tools Digital Multimeter, Auto-Ranging, 1000V

    Code: MM1000
    The Klein Tools MM600 Multimeter is an automatically ranging digital multimeter that measures AC/DC voltage, AC/DC current, and resistance. It can also measure temperature, capacitance, frequency, duty-cycle, test diodes and continuity. Exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of metersloaded with innovative, time-saving features.
    US$80.48
    Out Of Stock
    Stock qty: 0
  • NCVT-1 Klein Tools Non-Contact Voltage Tester Pen, 50 to 1000 Volts

    NCVT-1 Klein Tools Non-Contact Voltage Tester Pen, 50 to 1000 Volts

    Code: NCVT-1
    Klein Tools Non-Contact Voltage Tester detects standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, non tamper-resistant outlets and wires. A bright green LED will tell you the tester is working and also functions as a worklight. It changes to red and warning tones sound when voltage is detected.
    US$20.33
    Out Of Stock
    Stock qty: 0
  • CL800 Klein Tools Digital Clamp Meter, AC Auto-Range TRMS, Low Impedance (LoZ), Auto Off

    CL800 Klein Tools Digital Clamp Meter, AC Auto-Range TRMS, Low Impedance (LoZ), Auto Off

    Code: CL800
    Klein Tools CL800 Electrical Tester is an automatically ranging true root mean squared (TRMS) digital clamp meter that measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features.
    US$162.58
    In Stock
    Stock qty: 5
  • 3/16 X 3000' CONDUIT PULL STRING

    3/16 X 3000' CONDUIT PULL STRING

    Code: 435
    Vendor: GREENLEE TEXTRON INC| Vendor # 435
    US$94.35
    In Stock
    Stock qty: 2
  • 2750 FT. SPOOL NYLON ROPE

    2750 FT. SPOOL NYLON ROPE

    Code: 605
    Vendor: GREENLEE TEXTRON INC| Vendor # 605-6
    US$32.20
    In Stock
    Stock qty: 6
  • 1005 Klein Tools Crimping and Cutting Tool for Connectors

    1005 Klein Tools Crimping and Cutting Tool for Connectors

    Code: 1005
    The Klein Tools Crimping and Cutting Tool crimps both insulated and non-insulated 10-22 AWG terminals and connectors. The tapered nose which is great when working in tight spaces. The wire cutter in the nose specially hardended for long life.
    US$34.35
    In Stock
    Stock qty: 1
  • 19353 Klein Tools Conduit Reamer Replacement Blade Kit

    19353 Klein Tools Conduit Reamer Replacement Blade Kit

    Code: 19353
    Conduit replacement blade kit comes with two blades. For use with Klein Tools Cat. Nos. 85191 and 19352. Features a lifetime guarantee of quality and reliability.
    US$7.15
    In Stock
    Stock qty: 2
  • 32482 Klein Tools Replacement Bit. #1 Phillips, 3/16" Slotted

    32482 Klein Tools Replacement Bit. #1 Phillips, 3/16" Slotted

    Code: 32482
    A replacement bit contains a #1 Phillips and a 3/16-Inch Slotted tip. Fits the 11-in-1 (32500) and 10-in-1 (32477) Screwdriver/Nut Drivers. Precision-machined tips for exact fit into fastener.
    US$5.00
    In Stock
    Stock qty: 4
  • 32701 Klein Tools Switch Drive Handle with 2" Nut Drivers

    32701 Klein Tools Switch Drive Handle with 2" Nut Drivers

    Code: 32701-1
    Switch from a handle to a drill in a snap! Power drills make quick work of large fastening jobs but some times, you still need the finesse of a hand tool. Klein's Switch Drive Handle System allows you to easily alternate any accessory with a power groove between a power drill and hand tool minimizing the number of tools and saving space.The patented quick release mechanism in the handle secures any 1/4" hex shaft to quickly convert an impact rated accessory to the most rugged, long lasting, powerful hand tool in your bag.
    US$43.41
    In Stock
    Stock qty: 1
  • 32800 Klein Tools 6-in-1 Multi-Bit Nut Driver, Heavy Duty

    32800 Klein Tools 6-in-1 Multi-Bit Nut Driver, Heavy Duty

    Code: 32800
    This multi-nut driver featuring multiple sizes in one tool will reduce the number of individual nut drivers in your belt. The sizes are interchangeable ensuring you have the size you need when you need it. Color coded shaft ends make it easy to identify the size. Increase your productivity and lighten your load with this multi-nut driver.
    US$32.01
    In Stock
    Stock qty: 8
  • 1/8-1/2" UNIBIT

    1/8-1/2" UNIBIT

    Code: 34401
    Vendor: GREENLEE TEXTRON INC| Vendor # 34401
    US$53.31
    In Stock
    Stock qty: 2
  • 7/8" UNIBIT

    7/8" UNIBIT

    Code: 34411
    Vendor: GREENLEE TEXTRON INC| Vendor # 34411
    US$59.66
    In Stock
    Stock qty: 3
  • 7/8" TO 1-3/8" UNIBIT

    7/8" TO 1-3/8" UNIBIT

    Code: 36414
    Vendor: GREENLEE TEXTRON INC| Vendor # 36414
    US$104.13
    Out Of Stock
    Stock qty: 0
  • ARBOR FOR 9/16-1 3/16

    ARBOR FOR 9/16-1 3/16

    Code: 38522
    Vendor: GREENLEE TEXTRON INC| Vendor # 38522
    US$16.54
    In Stock
    Stock qty: 3
  • 51100 Klein Tools Wire Pulling Foam Lubricant

    51100 Klein Tools Wire Pulling Foam Lubricant

    Code: 51100
    Klein Tools' Foam Wire Pulling Lubricant is a no mess, no hassle alternative to traditional wax/gel lubricants. The foam fills the conduit and coats the wires as they are pulled through. The lubricant stays where it is applied, even in vertical conduit. It also dissolves clean from hands, clothing and carpeting.
    US$17.99
    In Stock
    Stock qty: 17
  • 53406 Klein Tools Steel Ship Auger Bit, Screw Point, 1 x 4"

    53406 Klein Tools Steel Ship Auger Bit, Screw Point, 1 x 4"

    Code: 53406
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16-Inch hex to fit 1/2-Inch (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.
    US$33.82
    In Stock
    Stock qty: 4
  • 53441 Klein Tools 1" Ship Auger Bit with Screw Point 15" L

    53441 Klein Tools 1" Ship Auger Bit with Screw Point 15" L

    Code: 53441
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16-Inch hex to fit 1/2-Inch (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.
    US$41.66
    In Stock
    Stock qty: 3
  • 53725 Klein Tools Armored and BX Cable Cutter

    53725 Klein Tools Armored and BX Cable Cutter

    Code: 53725
    The Klein Tools BX and Armored Cable Cutter is simple to use. It easily cuts armored cable up to 3/8-Inch (9.5 mm) diameter: BX, AC, MC, MCAP and Greenfield, with a couple of turns of the handle. Swift cutting blade eliminates burrs and won’t nick cable. Comes with one blade stored in handle for convenience. Up to six replacement blades can be stored in handle.
    US$42.75
    In Stock
    Stock qty: 5
  • 85191 Klein Tools Conduit Fitting and Reaming Screwdriver

    85191 Klein Tools Conduit Fitting and Reaming Screwdriver

    Code: 85191
    The Klein Tools Conduit-Fitting and Reaming Screwdriver can ream and smooth 1/2" (13 mm), 3/4" (19 mm), and 1" (25 mm) thin-wall conduit. It features a hooded-blade design that keeps the screwdriver tip from slipping out of screws, which is especially handy when tightening hard-to-reach conduit fittings. This screwdriver has a longer Cushion-Grip handle for even more comfort and torque while reaming.
    US$38.12
    In Stock
    Stock qty: 6
  • 9225 Klein Tools Tape Measure, 25-Foot Magnetic Double-Hook

    9225 Klein Tools Tape Measure, 25-Foot Magnetic Double-Hook

    Code: 93125
    Klein Tools Tape Measures deliver performance and durability expected by professional tradespeople. Safeguarded by a thick and durable protective nylon-coating, the Tough Blade stands out to 13-Foot. Able to endure the toughest of jobsite conditions, this tool also features a strong magnetic double hook, easy-to-read bold lines, and a retraction brake.
    US$27.96
    In Stock
    Stock qty: 3
  • #2 PHILLIPS SCREW HOLD

    #2 PHILLIPS SCREW HOLD

    Code: 0453-18C
    Vendor: GREENLEE TEXTRON INC| Vendor # 0453-18C
    US$13.42
    In Stock
    Stock qty: 4
  • 151TP EMC Fasteners & Tools 15" 1 Tamper Proof Screwdriver with Red Handle

    151TP EMC Fasteners & Tools 15" 1 Tamper Proof Screwdriver with Red Handle

    Code: 151TP
    15-IN-1 Tamperproof Red Screwdriver. Made in USA. This 15in1 is a must for all commercial/industrial tradesmen ( Electricians, Locksmiths,etc.) Loaded with the most common security bits, including: Spanner, Hex pin and Star pin.

    .
    US$39.78
    In Stock
    Stock qty: 7
  • 32477-12 Klein Tools 10-in-1 Multi-Bit Screwdriver / Nut Driver (12-Pack)

    32477-12 Klein Tools 10-in-1 Multi-Bit Screwdriver / Nut Driver (12-Pack)

    Code: 32477-12
    The Klein 10-in-1 Multi-Bit Screwdriver/Nut driver has the bits to handle your most common tasks. From Phillips or slotted to square and TORX®, these tips are precision-machined for an exact fit. The internal flanges inside the handle provide solid, twist- resistant blade anchor. A Cushion-Grip handle for greater torque and comfort helps you get the job done fast.
    US$20.15
    In Stock
    Stock qty: 13
  • FISHTAPE LEADER

    FISHTAPE LEADER

    Code: 439-1
    Vendor: GREENLEE TEXTRON INC| Vendor # 439-1
    US$35.73
    In Stock
    Stock qty: 1
  • SPEED FLEX LEADER

    SPEED FLEX LEADER

    Code: 439-2
    Vendor: GREENLEE TEXTRON INC| Vendor # 439-2
    US$34.10
    In Stock
    Stock qty: 2
  • 53726SEN Klein Tools BX Cutter Replacement Blade

    53726SEN Klein Tools BX Cutter Replacement Blade

    Code: 53726SEN
    Use this Replacement Blade with Klein Tools' BX and Armored Cable Cutter. This durable blade is designed to cleanly cut BX and 3/8-Inch armored cable. Though the blade is sharp, it will not nick the cable.
    US$9.41
    In Stock
    Stock qty: 6
  • 24FT. FISH STICK W/GLO

    24FT. FISH STICK W/GLO

    Code: 540-24
    Vendor: GREENLEE TEXTRON INC| Vendor # 540-24
    US$119.37
    In Stock
    Stock qty: 2
  • 601-4 Klein Tools 3/16" Cabinet Tip Screwdriver 4"

    601-4 Klein Tools 3/16" Cabinet Tip Screwdriver 4"

    Code: 601-4
    Klein's 3/16-Inch Cabinet Tip Screwdriver features a narrow cabinet tip to make tight spaces easily acceptable. This Cushion-Grip Handle Screwdriver offers the comfort and torque needed for all day work. Its Tip-Ident® quickly identifies screwdriver type and tip orientation, and its 4-Inch shaft is heat-treated for greater tool strength.
    US$9.58
    In Stock
    Stock qty: 6
  • 601-6 Klein Tools 3/16" Cabinet Tip Screwdriver 6"

    601-6 Klein Tools 3/16" Cabinet Tip Screwdriver 6"

    Code: 601-6
    Klein's 3/16-Inch Cabinet Tip Screwdriver features a narrow cabinet tip to make tight spaces easily acceptable. This Cushion-Grip Handle Screwdriver offers the comfort and torque needed for all day work. Its Tip-Ident® quickly identifies screwdriver type and tip orientation, and its 6-Inch shaft is heat-treated for greater tool strength.
    US$9.97
    In Stock
    Stock qty: 4
  • 601-8 Klein Tools 3/16" Cabinet Tip Screwdriver, 8"

    601-8 Klein Tools 3/16" Cabinet Tip Screwdriver, 8"

    Code: 601-8
    Cushion Grip handle allows for greater torque and comfort. Integral flanges inside handle provide solid, twist resistant blade anchor. Special heat treated shafts. Precision machined tip for exact fit. Premium chrome plated for smooth feel and corrosion resistance. Patented Tip Ident quickly identifies the type of screwdriver and screwdriver tip orientation. Meets or exceeds applicable ASME / ANSI specifications. Cabinet Tip screwdriver with round shank.
    US$11.64
    In Stock
    Stock qty: 4
  • 600-6 Klein Tools 5/16" Keystone Screwdriver, 6" Square Shank

    600-6 Klein Tools 5/16" Keystone Screwdriver, 6" Square Shank

    Code: 600-6
    Klein Tool's 5/16-Inch (8 mm) Keystone Screwdriver with 6-Inch square shank is designed for the most demanding uses. It has a cushion-grip handle for greater torque and comfort. Meets or exceeds applicable ASME / ANSI specifications and has Tip-Ident® that quickly identifies the screwdriver type and tip orientation
    US$15.22
    In Stock
    Stock qty: 6
  • 602-4DD Klein Tools 1/4" Keystone Demolition Driver, 4" Shank

    602-4DD Klein Tools 1/4" Keystone Demolition Driver, 4" Shank

    Code: 602-4DD
    Klein's ''Made in the USA" Slotted Demolition Driver is engineered, manufactured and tested for prying and chiseling. The heat-treated metal shaft runs the complete length of the handle to the metal strike cap. This transfers the impact force directly to the work surface. In addition, the plated metal strike cap protects the handle from hammer blows.
    US$18.17
    In Stock
    Stock qty: 6
  • 603-6 Klein Tools #3 Phillips Screwdriver 6" Round Shank

    603-6 Klein Tools #3 Phillips Screwdriver 6" Round Shank

    Code: 603-6
    The Klein Tools 6-Inch Phillips-Tip Screwdriver features a durable black tip that is precision-forged and ground with square edges to fit screw openings securely. Its shaft will not bond or twist in normal use due to integral flanges that provide an extra-strong, torque-proof anchor in the handle. This screwdriver is made of high-quality tempered steel.
    US$15.15
    In Stock
    Stock qty: 4
  • 603-7 Klein Tools #2 Phillips Screwdriver 7" Round Shank

    603-7 Klein Tools #2 Phillips Screwdriver 7" Round Shank

    Code: 603-7
    The Klein Tools 7-Inch (177.8 mm) Phillips-Tip Screwdriver features a durable black tip that is precision-forged and ground with square edges to fit screw openings securely. Its shaft will not bond or twist in normal use due to integral flanges that provide an extra-strong, torque-proof anchor in the handle. This screwdriver is made of high-quality tempered steel.
    US$12.05
    In Stock
    Stock qty: 7
  • 603-3 Klein Tools #1 Phillips Screwdriver, 3" Round Shank

    603-3 Klein Tools #1 Phillips Screwdriver, 3" Round Shank

    Code: 603-3
    The Klein Tools #1 Phillips 3-Inch round Shank Screwdriver is preicison-machined for an accurate fit and torque without slippage. This Cushion-Grip Handle Screwdriver offers the comfort needed for all day work. Its Tip-Ident® quickly identifies screwdriver type and tip orientation.
    US$9.90
    In Stock
    Stock qty: 6
  • 605-6 Klein Tools 1/4" Cabinet Tip Screwdriver, Heavy Duty, 6"

    605-6 Klein Tools 1/4" Cabinet Tip Screwdriver, Heavy Duty, 6"

    Code: 605-6
    Klein's 1/4-Inch Cabinet Tip Screwdriver features a narrow cabinet tip to make tight spaces easily acceptable. This Cushion-Grip Handle Screwdriver offers the comfort and torque needed for all day work. Its Tip-Ident® quickly identifies screwdriver type and tip orientation, and its heavy-duty 6-Inch shaft is heat-treated for greater tool strength.
    US$11.98
    In Stock
    Stock qty: 5
  • 3/4 CONDUIT PISTON"

    3/4 CONDUIT PISTON"

    Code: 609-5
    Vendor: GREENLEE TEXTRON INC| Vendor # 609-5
    US$36.22
    In Stock
    Stock qty: 28
  • 1/2 CONDUIT PISTON"

    1/2 CONDUIT PISTON"

    Code: 608-5
    Vendor: GREENLEE TEXTRON INC| Vendor # 608-5
    US$26.89
    In Stock
    Stock qty: 3
  • 612-4 Klein Tools Terminal Block Screwdriver, 1/8" Cabinet

    612-4 Klein Tools Terminal Block Screwdriver, 1/8" Cabinet

    Code: 612-4
    Klein Tools' Terminal Block Screwdriver is precision-machined for an exact fit. This flat head screwdriver provides 76-Percent higher torque values than the required ASME B107 Standard. Its Cushion-Grip handle offers the comfort needed for all-day work.
    US$12.70
    In Stock
    Stock qty: 10
  • 627-20 Klein Tools 6-in-1 Tapping Tool

    627-20 Klein Tools 6-in-1 Tapping Tool

    Code: 627-20
    Klein's 6-in-1 Tapping Tool provides tradespeople with a versatile solution to forming new screw threads, reforming burred threads and/or cleaning out plaster obstructions. Six convenient thread sizes in one tool. Perfect for work across a variety of jobsites.
    US$33.18
    In Stock
    Stock qty: 4
  • 630-5/16 Klein Tools 5/16" Nut Driver Cushion-Grip 3" Shaft

    630-5/16 Klein Tools 5/16" Nut Driver Cushion-Grip 3" Shaft

    Code: 630-5/16
    Klein has the nut drivers professionals demand to get the job done. The full hollow shaft facilitates work on stacked circuit boards or other long bolt applications. Premium chrome-plated for smooth feel and corrosion resistance. The handle end is color coded for easy identification. The patented Tip-Ident® quickly identifies nut driver and size.
    US$9.78
    In Stock
    Stock qty: 6
  • 630-1/4 Klein Tools 1/4" Nut Driver 3" Shaft Cushion Grip

    630-1/4 Klein Tools 1/4" Nut Driver 3" Shaft Cushion Grip

    Code: 630-1/4
    Klein has the nut drivers professionals demand to get the job done. The full hollow shaft facilitates work on stacked circuit boards or other long bolt applications. Premium chrome-plated for smooth feel and corrosion resistance. The handle end is color coded for easy identification. The patented Tip-Ident® quickly identifies nut driver and size.
    US$9.44
    In Stock
    Stock qty: 5
  • 721-34 Greenlee 3/4 Knock Out Punch

    721-34 Greenlee 3/4 Knock Out Punch

    Code: 721-34
    Vendor: GREENLEE TEXTRON INC| Vendor # 721-34
    US$40.68
    Out Of Stock
    Stock qty: 0
  • 11/2-2" K.O. SET"

    11/2-2" K.O. SET"

    Code: 7237BB
    Vendor: GREENLEE TEXTRON INC| Vendor # 72555
    US$179.96
    In Stock
    Stock qty: 2
  • 807-18 Klein Tools Electrician's Straight-Claw Hammer

    807-18 Klein Tools Electrician's Straight-Claw Hammer

    Code: 807-18
    Electrician's Straight-Claw Hammer is made of high-strength fiberglass shaft that absorbs shock and keeps head tight. It is balanced and designed specifically for use in electrical work. Hammer comes with a comfortable, perforated neoprene grip.
    US$51.75
    In Stock
    Stock qty: 5
  • 1EMT - 3/4" RIGID"

    1EMT - 3/4" RIGID"

    Code: 842G
    Vendor: GREENLEE TEXTRON INC| Vendor # 842
    US$111.24
    In Stock
    Stock qty: 3
  • 1 3/4 HOLE SAW FOR 11/4"

    1 3/4 HOLE SAW FOR 11/4"

    Code: 825-134
    Vendor: GREENLEE TEXTRON INC| Vendor # 825-1-3/4
    US$14.01
    In Stock
    Stock qty: 3
  • 1 3/8 HOLE SAW FOR 1""

    1 3/8 HOLE SAW FOR 1""

    Code: 825-138
    Vendor: GREENLEE TEXTRON INC| Vendor # 825-1-3/8
    US$11.52
    In Stock
    Stock qty: 1
  • 2 HOLE SAW FOR 1 1/2""""""""

    2 HOLE SAW FOR 1 1/2""""""""

    Code: 825-2
    Vendor: GREENLEE TEXTRON INC| Vendor # 825-2
    US$14.01
    In Stock
    Stock qty: 1
  • 2 1/2 HOLE SAW FOR 2""

    2 1/2 HOLE SAW FOR 2""

    Code: 825-212
    Vendor: GREENLEE TEXTRON INC| Vendor # 825-2-1/2
    US$17.73
    In Stock
    Stock qty: 2
  • 3 5/8 HOLE SAW FOR 3""

    3 5/8 HOLE SAW FOR 3""

    Code: 825-358
    Vendor: GREENLEE TEXTRON INC| Vendor # 825-3-5/8
    US$21.81
    In Stock
    Stock qty: 2
  • 7/8 HOLE SAW FOR 1/2""""""""

    7/8 HOLE SAW FOR 1/2""""""""

    Code: 825-78
    Vendor: GREENLEE TEXTRON INC| Vendor # 825-7/8
    US$12.20
    In Stock
    Stock qty: 1
  • 11/8 HOLE SAW FOR 3/4""

    11/8 HOLE SAW FOR 3/4""

    Code: 825-118
    Vendor: GREENLEE TEXTRON INC| Vendor # 825-1-1/8
    US$12.20
    In Stock
    Stock qty: 2
  • 3/4 EMT-1/2RIGID"

    3/4 EMT-1/2RIGID"

    Code: 841G
    Vendor: GREENLEE TEXTRON INC| Vendor # 841F
    US$76.72
    In Stock
    Stock qty: 1
  • 1/2 & 3/4" BENDER"

    1/2 & 3/4" BENDER"

    Code: 845G
    Vendor: GREENLEE TEXTRON INC| Vendor # 84H1
    US$37.20
    Out Of Stock
    Stock qty: 0
  • INDUSTRIAL MAINTANCE HOLE SAW KIT

    INDUSTRIAL MAINTANCE HOLE SAW KIT

    Code: 890G
    Vendor: GREENLEE TEXTRON INC| Vendor # 3479
    US$305.32
    In Stock
    Stock qty: 1
  • A2166 Klein Tools Screwdriver, 1/8" Cabinet Tip, 6"

    A2166 Klein Tools Screwdriver, 1/8" Cabinet Tip, 6"

    Code: A2166
    Klein Tools' tough amber screwdrivers stand up to harsh jobsite conditions, day-in and day-out. Its small-diameter, round shank is perfect for use in tight spaces with a comfortable handle for all-day use. This flat head screwdriver is well-suited for electrical and telecommunications work.
    US$7.75
    In Stock
    Stock qty: 3
To top