SharkBite Fittings

Innovative push-to-connect design makes for quick and easy installation when joining same-size pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

General purpose, spring-loaded check valve prevents the reverse flow of water. Innovative push-to-connect design makes for quick and easy installation on PEX, copper, CPVC, PE-RT and SDR-9 HDPE lines. Can be installed horizontally or vertically. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
• No special tools, crimping, glue or soldering is needed.
• Can be installed horizontally or vertically.
• Remove if needed using Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 150 psi and 200°F (93°C).

LARGE BORE SharkBite Commercial is an extensive range of SharkBite Fitting and full flow Ball Valves in sizes 1¼”, 1½”, 2” Copper Tube Size (CTS) suitable for use with Copper, PEX,(SharkBite Tube Liner must be fitted to the PEX Pipe) and CPVC pipe. Use in commercial and residential applications for potable water, hydronic heating, chilled water and general water distribution for irrigation.

General purpose, spring-loaded check valve prevents the reverse flow of water. Innovative push-to-connect design makes for quick and easy installation on PEX, copper, CPVC, PE-RT and SDR-9 HDPE lines. Can be installed horizontally or vertically. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
• No special tools, crimping, glue or soldering is needed.
• Can be installed horizontally or vertically.
• Remove if needed using Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 150 psi and 200°F (93°C).

General purpose, spring-loaded check valve prevents the reverse flow of water. Innovative push-to-connect design makes for quick and easy installation on PEX, copper, CPVC, PE-RT and SDR-9 HDPE lines. Can be installed horizontally or vertically. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
• No special tools, crimping, glue or soldering is needed.
• Can be installed horizontally or vertically.
• Remove if needed using Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 150 psi and 200°F (93°C).

The SharkBite® Ball Valves are high quality forged brass ball valves with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, PEX and PE-­RT in seconds with relative ease.

The SharkBite® Ball Valves are high quality forged brass ball valves with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, PEX and PE-­RT in seconds with relative ease.

The SharkBite® Ball Valves are high quality forged brass ball valves with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, PEX and PE-­RT in seconds with relative ease.

Innovative SharkBite push-to-connect pipe repair couplings make for quick and easy installations. Connect two pieces of PEX, copper, CPVC, PE-RT and / or SDR-9 HDPE pipe in any combination. Approved for underground and behind-the-wall applications, brass couplings with push-to-connect design can be installed permanently or provide a temporary fix while you work. Choose the right model for your pipe type, measure and mark the correct insertion depth and push to connect.

Push-to-connect brass pipe connectors are ideal for working in tight spaces but can be leveraged wherever repairs are needed. The faster install time and versatile use reduces installation errors, allowing pros to schedule more jobs in a day. Plus, SharkBite brass pipe couplings:

• Are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination.
• Don't require special tools, crimping, glue or soldering.
• Can be installed in wet lines.
• Are approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Can be easily removed using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Large diameter fittings (1-1/4" - 2" ) require a Stiffener (sold separately) when connecting to PEX pipe.
• Are rated for 200 psi and 200°F (93°C).

Innovative SharkBite push-to-connect pipe repair couplings make for quick and easy installations. Connect two pieces of PEX, copper, CPVC, PE-RT and / or SDR-9 HDPE pipe in any combination. Approved for underground and behind-the-wall applications, brass couplings with push-to-connect design can be installed permanently or provide a temporary fix while you work. Choose the right model for your pipe type, measure and mark the correct insertion depth and push to connect.

Push-to-connect brass pipe connectors are ideal for working in tight spaces but can be leveraged wherever repairs are needed. The faster install time and versatile use reduces installation errors, allowing pros to schedule more jobs in a day. Plus, SharkBite brass pipe couplings:

• Are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination.
• Don't require special tools, crimping, glue or soldering.
• Can be installed in wet lines.
• Are approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Can be easily removed using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Large diameter fittings (1-1/4" - 2" ) require a Stiffener (sold separately) when connecting to PEX pipe.
• Are rated for 200 psi and 200°F (93°C).

Innovative SharkBite push-to-connect pipe repair couplings make for quick and easy installations. Connect two pieces of PEX, copper, CPVC, PE-RT and / or SDR-9 HDPE pipe in any combination. Approved for underground and behind-the-wall applications, brass couplings with push-to-connect design can be installed permanently or provide a temporary fix while you work. Choose the right model for your pipe type, measure and mark the correct insertion depth and push to connect.

Push-to-connect brass pipe connectors are ideal for working in tight spaces but can be leveraged wherever repairs are needed. The faster install time and versatile use reduces installation errors, allowing pros to schedule more jobs in a day. Plus, SharkBite brass pipe couplings:

• Are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination.
• Don't require special tools, crimping, glue or soldering.
• Can be installed in wet lines.
• Are approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Can be easily removed using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Large diameter fittings (1-1/4" - 2" ) require a Stiffener (sold separately) when connecting to PEX pipe.
• Are rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy installation. Connect two pieces of different sized PEX, copper, CPVC, PE-RT and / or SDR-9 HDPE pipe in any combination. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination.
• No special tools, crimping, glue or soldering required.
• Can be installed in wet lines.
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Large diameter fittings (1-1/4" - 2" ) require Stiffener (sold separately) when connecting to PEX pipe.
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy installation. Connect two pieces of different sized PEX, copper, CPVC, PE-RT and / or SDR-9 HDPE pipe in any combination. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination.
• No special tools, crimping, glue or soldering required.
• Can be installed in wet lines.
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Large diameter fittings (1-1/4" - 2" ) require Stiffener (sold separately) when connecting to PEX pipe.
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy transition between CTS pipe to an MNPT threaded connection. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

Innovative push-to-connect design makes for quick and easy transition between CTS pipe to an MNPT threaded connection. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
• No special tools, crimping, glue or soldering required.
• Can be installed in wet lines.
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Large diameter fittings (1-1/4" - 2" ) require a Stiffener (sold separately) when connecting to PEX pipe.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy transition between CTS pipe to an MNPT threaded connection. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
• No special tools, crimping, glue or soldering required.
• Can be installed in wet lines.
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Large diameter fittings (1-1/4" - 2" ) require a Stiffener (sold separately) when connecting to PEX pipe.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

The SharkBite® Push-To-Connect (PTC) Fittings allow the user to connect pipe in seconds with relative ease.

Innovative push-to-connect design makes for quick and easy transition between CTS pipe to an MNPT threaded connection. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
• No special tools, crimping, glue or soldering required.
• Can be installed in wet lines.
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Large diameter fittings (1-1/4" - 2" ) require a Stiffener (sold separately) when connecting to PEX pipe.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy transition between CTS pipe to an MNPT threaded connection. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
• No special tools, crimping, glue or soldering required.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy transition between CTS pipe to an MNPT threaded connection. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
• No special tools, crimping, glue or soldering required.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy transition between CTS pipe to an MNPT threaded connection. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
• No special tools, crimping, glue or soldering required.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy transition between CTS pipe to an MNPT threaded connection. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
• No special tools, crimping, glue or soldering required.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy transition between CTS pipe to an MNPT threaded connection. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
• No special tools, crimping, glue or soldering required.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy transition between CTS pipe to an MNPT threaded connection. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
• No special tools, crimping, glue or soldering required.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy installation when connecting two pieces of potable water pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipes in any combination.
• No special tools, crimping, glue or soldering required.
• Can be installed in wet lines.
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Large diameter fittings (1-1/4" - 2" ) require a Stiffener (sold separately) when connecting to PEX pipe.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy installation when connecting two pieces of potable water pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipes in any combination.
• No special tools, crimping, glue or soldering required.
• Can be installed in wet lines.
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Large diameter fittings (1-1/4" - 2" ) require a Stiffener (sold separately) when connecting to PEX pipe.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy installation when connecting two pieces of potable water pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipes in any combination.
• No special tools, crimping, glue or soldering required.
• Can be installed in wet lines.
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Large diameter fittings (1-1/4" - 2" ) require a Stiffener (sold separately) when connecting to PEX pipe.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy installation when connecting two pieces of different sized pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
• No special tools, crimping, glue or soldering required.
• Can be installed in wet lines.
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy installation. Slip couplings are the most efficient way to repair a burst pipe or leak. A slip fitting does the job of two couplings and extra pipe. Only one end of the coupling has a stop, allowing the opposite end to slide freely over the end of a pipe. The fittings are then released using a disconnect tool and slide back onto the other end of the pipe for a successful connection and leak repair.

• A Disconnect Clip or Disconnect Tongs are required to use this product.
• Keep on hand for an emergency freeze or repair.
• Compatible with copper and CPVC pipe only.
• No special tools, crimping, glue or soldering is needed.
• Can be installed in wet lines.
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy installation. Slip couplings are the most efficient way to repair a burst pipe or leak. A slip fitting does the job of two couplings and extra pipe. Only one end of the coupling has a stop, allowing the opposite end to slide freely over the end of a pipe. The fittings are then released using a disconnect tool and slide back onto the other end of the pipe for a successful connection and leak repair.

• A Disconnect Clip or Disconnect Tongs are required to use this product.
• Keep on hand for an emergency freeze or repair.
• Compatible with copper and CPVC pipe only.
• No special tools, crimping, glue or soldering is needed.
• Can be installed in wet lines.
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy installation. Slip couplings are the most efficient way to repair a burst pipe or leak. A slip fitting does the job of two couplings and extra pipe. Only one end of the coupling has a stop, allowing the opposite end to slide freely over the end of a pipe. The fittings are then released using a disconnect tool and slide back onto the other end of the pipe for a successful connection and leak repair.

• A Disconnect Clip or Disconnect Tongs are required to use this product.
• Keep on hand for an emergency freeze or repair.
• Compatible with copper and CPVC pipe only.
• No special tools, crimping, glue or soldering is needed.
• Can be installed in wet lines.
• Rated for 200 psi and 200°F (93°C).

Flexible water heater connectors allow you to work in tight spaces and easily connect water heaters with existing pipes that don't line up. Approved for use on electric or gas water heaters with a flue vent. Innovative design reduces the need for extra joints or fittings allowing for faster install time.

• Approved for electric and gas water heaters with flue vent.
• Compatible with PEX, copper, CPVC and PE-RT pipe.
• No special tools, crimping, glue or soldering is needed.
• Can be installed in wet lines.
• Can be rotated for easier and faster installation.
• Ideal for working in tight spaces.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).

Innovative push-to-connect design makes for quick and easy installation when joining same-size pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination.
• No special tools, crimping, glue or soldering required.
• Can be installed in wet lines.
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Large diameter fittings (1-1/4" - 2" ) require a Stiffener (sold separately) when connecting to PEX pipe.
• Can be rotated after assembly for easier and faster installation.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy installation when joining same-size pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination.
• No special tools, crimping, glue or soldering required.
• Can be installed in wet lines.
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Large diameter fittings (1-1/4" - 2" ) require a Stiffener (sold separately) when connecting to PEX pipe.
• Can be rotated after assembly for easier and faster installation.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy installation when joining same-size pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination.
• No special tools, crimping, glue or soldering required.
• Can be installed in wet lines.
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Large diameter fittings (1-1/4" - 2" ) require a Stiffener (sold separately) when connecting to PEX pipe.
• Can be rotated after assembly for easier and faster installation.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy installation when joining different size pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination.
• No special tools, crimping, glue or soldering required.
• Can be installed in wet lines.
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Large diameter fittings (1-1/4" - 2" ) require a Stiffener (sold separately) when connecting to PEX pipe.
• Can be rotated after assembly for easier and faster installation.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy installation when joining different size pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination.
• No special tools, crimping, glue or soldering required.
• Can be installed in wet lines.
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Large diameter fittings (1-1/4" - 2" ) require a Stiffener (sold separately) when connecting to PEX pipe.
• Can be rotated after assembly for easier and faster installation.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy installation when joining different size pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination.
• No special tools, crimping, glue or soldering required.
• Can be installed in wet lines.
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Large diameter fittings (1-1/4" - 2" ) require a Stiffener (sold separately) when connecting to PEX pipe.
• Can be rotated after assembly for easier and faster installation.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Innovative push-to-connect design makes for quick and easy installation when joining different size pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination.
• No special tools, crimping, glue or soldering required.
• Can be installed in wet lines.
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Large diameter fittings (1-1/4" - 2" ) require a Stiffener (sold separately) when connecting to PEX pipe.
• Can be rotated after assembly for easier and faster installation.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Plug the end of PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe. Innovative push-to-connect design makes for quick and easy installation and removal. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
• No special tools, crimping, glue or soldering required.
• Can be installed in wet lines.
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Large diameter fittings (1-1/4" - 2" ) require a Stiffener (sold separately) when connecting to PEX pipe.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

Plug the end of PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe. Innovative push-to-connect design makes for quick and easy installation and removal. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
• No special tools, crimping, glue or soldering required.
• Can be installed in wet lines.
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground).
• Large diameter fittings (1-1/4" - 2" ) require a Stiffener (sold separately) when connecting to PEX pipe.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).
• Rated for 200 psi and 200°F (93°C).

The SharkBite® Water Heater Connectors are used in residential and commercial applications to connect the hot and cold supply lines to the water heater. The connectors are EPDM knitted with braided stainless steel. The connectors are available in 12", 15", 18" and 24" lengths. The connections on the connectors are 3/4" FIP X 3/4" SharkBite. The SharkBite connection allows the installer to connect to copper, PEX, CPVC and PE-RT pipe eliminating the need for an additional transition fitting.

Allows for the Universal brass push connection to be disconnected from the pipe.

• Compact design to keep on-hand.
• Lightweight and durable plastic construction.
• Ideal for working in tight spaces.

Allows for the Universal brass push connection to be disconnected from the pipe.

• Compact design to keep on-hand.
• Lightweight and durable plastic construction.
• Ideal for working in tight spaces.

Allows for the Universal brass push connection to be disconnected from the pipe.

• Compact design to keep on-hand.
• Lightweight and durable plastic construction.
• Ideal for working in tight spaces.

Add a new line to a fixture by tapping into a 1/2" or 3/4" pipe. Features a quarter-turn full-port brass ball valve that allows for easy on / off control of the supply line. Innovative push-to-connect design makes for quick and easy installation. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Ideal for adding supply lines to fixtures and appliances such as dishwashers, humidifiers and ice makers.
• Sleek chrome finish for an attractive appearance.
• Quarter-turn full-port brass ball valve.
• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
• No special tools, crimping, glue or soldering is needed.
• Can be installed in wet lines.
• Can be rotated for easier and faster installation.
• Ideal for working in tight spaces.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).

Add a new line to a fixture by tapping into a 1/2" or 3/4" pipe. Features a quarter-turn full-port brass ball valve that allows for easy on / off control of the supply line. Innovative push-to-connect design makes for quick and easy installation. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Ideal for adding supply lines to fixtures and appliances such as dishwashers, humidifiers and ice makers.
• Sleek chrome finish for an attractive appearance.
• Quarter-turn full-port brass ball valve.
• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
• No special tools, crimping, glue or soldering is needed.
• Can be installed in wet lines.
• Can be rotated for easier and faster installation.
• Ideal for working in tight spaces.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).

Add a new line to a fixture by tapping into a 1/2" or 3/4" pipe. Features a quarter-turn full-port brass ball valve that allows for easy on / off control of the supply line. Innovative push-to-connect design makes for quick and easy installation. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

• Ideal for adding supply lines to fixtures and appliances such as dishwashers, humidifiers and ice makers.
• Sleek chrome finish for an attractive appearance.
• Quarter-turn full-port brass ball valve.
• Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe.
• No special tools, crimping, glue or soldering is needed.
• Can be installed in wet lines.
• Can be rotated for easier and faster installation.
• Ideal for working in tight spaces.
• Remove using a Disconnect Clip or Disconnect Tongs (both sold separately).